Monitor your facility's electricity consumption — in real time

Smartsen combines measurement hardware and a cloud platform to give you complete visibility into what your electrical installation consumes and generates. Automatic alerts, instant reports, and no upfront investment in equipment.

Request information See how it works
< 1 min
power outage
detection
10 min
installation with no
supply interruption
24/7
continuous cloud
monitoring

Situations Smartsen detects before they
become a real problem

Facilities without energy monitoring face these situations every day. See if any of them sounds familiar.

01

The outage nobody sees

A panel tripped, a line stopped, the cold room stopped cooling. Without monitoring, response time depends on someone physically noticing it.

02

Equipment on but not working

A compressor, HVAC system, or packaging line should be drawing power but there's no activity. That silence goes unnoticed without low-threshold alerts.

03

The bill came in high — no one knows why

There's no way to attribute the extra cost to a specific piece of equipment, area, or time of day. The data needed to act arrives after the billing period has already closed.

04

Multiple locations with no unified view

Branches, plants, or separate sectors that require physical visits or phone calls to check their energy status. There is no centralized view.

05

Solar panels as a black box

Without measurement, photovoltaic generation is invisible. There's no way to know if the inverter failed, if output dropped, or how much is being self-consumed.

06

Equipment failing without apparent cause

Variable frequency drives tripping, transformers overheating, electronics failing prematurely. The cause is usually poor power quality.

How the energy monitoring system works

Smartsen is designed to be simple to install and operate, with visible results from day one.

1

Install the E301

The meter installs in your existing electrical panel using split-core current transformers. No supply interruption — takes about 10 minutes.

2

Measure everything in the cloud

The E301 sends real-time data via Wi-Fi to the Smartsen platform. Voltage, current, power, harmonics, and anomalies — available from any device.

3

Act on data

Receive automatic alerts, review history, and generate reports. The system detects consumption patterns outside the expected baseline so you can act before it's too late.

No upfront hardware investment. Equipment is provided as part of your plan: it remains Smartsen's property and replacement in case of failure is included in the monthly subscription — no extra cost or management required.

Real-time energy management from any device

The Smartsen web platform centralizes measurement, alerts, and historical analysis for all your facilities in one place. Works on PC, tablet, and mobile — nothing to install.

Real time

Real-time dashboard

Unified view of power, voltage, and current across all measurement points, continuously updated by cluster and by phase.

Alerts

Automatic alerts

Maximum and minimum thresholds by sector, time of day, and parameter. Email notifications for outages, anomalous consumption, or equipment out of operation.

Historical

Historical monitoring

Consumption analysis in daily, monthly, quarterly, annual, or custom views. Period comparison to measure the impact of efficiency actions.

Reports

Automatic reports

PDF and Excel reports generated and emailed on a configurable schedule. Includes consumption and electricity cost breakdown by cluster.

Multi-location

Multi-device · Multi-location

Hierarchical organization: company → location → panel → sector. A unified view of all installations no matter how many there are.

Power quality

Power quality analysis

Individual harmonics measurement H2–H21, voltage and current THD, and phase imbalance to diagnose hidden electrical problems.

Solar

Solar PV monitoring

Simultaneous measurement of consumption and solar generation. Real-time energy balance and self-consumption history with the same device and platform.

Goals

Consumption limits and targets

Consumption targets by period with alerts on deviations. Automatic detection of consumption outside the expected historical pattern for each sector.

Anomalies

Anomaly detection

Machine learning system that identifies consumption outside expected levels based on usage history, alerting on operational deviations.

Smartsen dashboard — real-time view of all measurement points with power, voltage and current updated by sector and phase
Historical monitoring in Smartsen — monthly energy consumption chart with comparative period analysis and Excel export Alert configuration in Smartsen — maximum and minimum thresholds by sector, active schedule and email notification recipients

What type of facility is Smartsen for?

The same hardware and platform adapt to industrial, commercial, multi-location, and residential installations with solar generation.

Industrial & Medium/Large Commercial

Primary segment · Auditor plan recommended

Industrial facility with electrical panel and energy monitoring by production line
  • Industrial plant: measurement by production line, consumption-per-shift correlation, off-peak demand detection.
  • Retail chain: consumption comparison by branch, deviation alerts, and monthly consolidated report.
  • Commercial building: energy cost breakdown by tenant or sector with automatic billing.
  • Efficiency program: baseline measurement and validation of the impact of each implemented action.
Auditor Plan — USD 70 / device / month

Residential & Small Business

Secondary segment · Standard plan recommended

Residential installation with solar PV system — generation and consumption monitoring with Smartsen
  • Bill control: identify what consumes the most, when, and whether something shouldn't be on.
  • Solar PV system: verify generation, self-consumption, and consumption/grid balance with a single device.
  • Anomaly detection: unexpected nighttime consumption, equipment left on, or a silent failure.
  • Circuit separation: home and office under the same utility meter, broken down by channel.
Standard Plan — USD 50 / device / month

How our customers use Smartsen

Four different buying motivations, four real-world contexts. Energy monitoring creates value beyond just reducing the electricity bill.

Operational visibility
Technology · Corporate offices

The company needed to understand consumption and operational usage patterns across multiple distributed devices by location. Smartsen data revealed physical usage profiles of the facilities — key information for reorganizing in-person attendance and building occupancy.

Smartsen alerts detected nighttime outages, triggering internal protocols for physical security and protection of critical information in real time.
Cost control
Logistics · Multi-tenant plant

The plant operates with multiple tenants sharing electrical infrastructure. The challenge was assigning each tenant's energy cost accurately and without manual processes. One E301 per sectional panel, one per tenant.

Automatic valued reports per tenant: transparent, accurate energy billing available in seconds. Manual tasks and allocation errors were eliminated.
PV management
Residential solar installation
Residential · Solar PV · Buenos Aires

Micro-inverter system (500 W) in a private residence. The owner wanted visibility into generated energy, the consumption/generation balance, and the ability to detect installation failures remotely.

15% reduction in measured consumption. Detection of a refrigerator failure (compressor running non-stop due to open door) and remote resolution before food was lost.
Deviation detection
Home & office · same meter
Mixed use · Residential + Commercial · Buenos Aires

A property with residential and office spaces under the same utility meter. The goal was to separate consumption by use and detect out-of-pattern situations on each circuit independently.

Air conditioning fault diagnosed via consumption and voltage profile analysis — no site visit required. Separate home/office costs tracked with a single device.
< 1 min
to detect a power
supply outage
10 min
typical installation
with no supply interruption
5 years
historical data retention
on Auditor Plan
24/7
continuous cloud
monitoring

A monthly service with hardware included — no upfront investment

Smartsen is contracted as a monthly subscription with hardware provided as part of the plan. You subscribe to operational availability, not equipment. Pricing is per installed device.

Standard

USD 50 / device / month

Complete monitoring with automatic alerts and reports for individual installations or small networks.

  • Full web platform — PC, tablet and mobile
  • Max, min, and anomalous consumption alerts
  • Automatic PDF and Excel reports by email
  • Up to 5 users with platform access
  • Instant data retention: 3 months
  • Historical data retention: 2 years
  • Dedicated support — 48 business-hour SLA
  • Device replacement on failure — up to 72 business hours
Inquire about this plan
Recommended

Auditor

USD 70 / device / month

Advanced energy management with auditing, power quality analysis, and SmartSuite ecosystem integration.

  • Everything included in the Standard Plan
  • Energy audit service included in the plan
  • H2–H21 harmonics and power quality measurement
  • Instant data retention: 1 year
  • Historical data retention: 5 years
  • Automatic report with electricity cost by cluster
  • SmartSuite integration: Smart IoT + Smart SSC
  • Personalized support with follow-up — 24 business-hour SLA
  • Device replacement on failure — up to 48 business hours
Inquire about this plan

Prices in US dollars plus applicable taxes. Price per installed device, regardless of the plan selected. Replacement times are indicative and subject to geographic location and logistics availability.

You subscribe to operational availability, not equipment

Aspect Hardware purchase Smartsen included
Upfront investment Equipment purchase cost No upfront investment
Replacement on failure Customer's responsibility Included in subscription
Platform updates Occasional or paid Continuous at no extra cost
Technical advisory Customer's responsibility Included in the service
Hardware obsolescence Customer bears the risk Smartsen's responsibility

SmartSuite — Smartsen as part of a complete operational platform

Smartsen is the energy measurement component of SmartSuite. It can be used independently or integrated with the other tools to connect electrical data with operations.

Smartsen

Energy measurement and monitoring. E301 hardware plus cloud electrical data platform. The entry point to SmartSuite.

This product

Smart SSC

Mobile app for technicians. Corrective and preventive maintenance management with traceability by user, equipment, and location. Integrable with Smartsen consumption data.

Auditor Plan

Smart IoT

Connected device control. Sensors, relays, temperatures, schedules, and remote automations. Combined with Smartsen: you measure consumption and can also act on it.

Auditor Plan
SmartSuite ecosystem diagram — integration between Smartsen, Smart SSC and Smart IoT
Integration case — Supermarket Chain

Smartsen + Smart IoT were deployed across supermarket branches to automate the shutdown of secondary loads during non-operating hours. Smart IoT executed remote, scheduled shutdown actions; Smartsen measured and verified the resulting consumption reduction. The savings were immediate, measurable, and replicable across other branches — turning an operational decision into a verified, data-backed result.

Ingertec + Pixsun

Smartsen is developed in Buenos Aires, Argentina, by Ingertec and Pixsun

Ingertec brings over 20 years of experience building software for large enterprises — multi-user and multi-location systems focused on business operations. Pixsun brings domain expertise: it works in solar energy and energy efficiency, knows installations from the inside, and understands what to measure because it knows what matters in a real installation.

Complementary expertise

A system that understands energy and knows how to build software for the businesses that consume it. A combination that produces something neither company could build alone.

Local team, direct support

Direct support from our team in Buenos Aires — no outsourced helpdesks, no international intermediaries. On-site technical visits in Buenos Aires and greater metro area. The team is reachable directly.

A product that evolves

Smartsen is not a closed product. The platform adapts to each client's real needs — with custom hardware and software development capacity when the problem demands it.

Smartsen E301 — Electrical measurement hardware

Three-phase meter manufactured in Argentina, supporting industrial, commercial, and residential installations. Installs without supply interruption.

E301 Wi-Fi

Three-phase meter · Industrial / Commercial / Residential

Connectivity Wi-Fi IEEE 802.11 b/g/n · 2.4 GHz
Measurement channels 3 independent channels (V + I)
Voltage measurement AC ×3 · 220/380 V · ±0.5 %
Current measurement AC ×3 · 100–500 A · ±0.5 %
Harmonics H2 – H21
Measurement standard IEC 62053-21 · Class 1
Operating temperature −20 °C to +60 °C
Manufactured in Argentina
The three channels are configurable as a three-phase installation or as independent single-phase circuits (e.g.: general consumption + air conditioning + solar generation). Available CTs: 100 A · 150 A · 250 A · 500 A.
IEC 62052-11:2020 IEC 61000-6-1:2019 IEC 61000-6-3:2021 ETSI EN 301 489
View full technical specifications

Want to know how Smartsen applies to your facility?

Contact us through your region — Spanish-language support, in local time, no intermediaries.

🌎 Global / South America
Address Av. Jujuy 1963, Buenos Aires, Argentina
Email [email protected]
Phone (+54 11) 3221-4318 WhatsApp +54 9 11 4426-0023
🇲🇽 North & Central America
Address Calle San Luis Potosí 176, Col. Roma Norte, C.P. 06700, CDMX, México
Email [email protected] Phone (+52 56) 4068-0006

Request information